mastrad logohome





ZMK 5050 ROAD MARKING CONTROL KIT




ZMK 5050 ROAD MARKING CONTROL KIT


DIN EN 13197 - DIN EN 13212

DEFINITION

Comprehensive set of tools for the Quality Control of road markings

The kit includes the complete range of instruments required for control checks on road markings.

APPLICATION AREAS

  • Allows the applicator to monitor and record measurements during the application of road markings as well as quality control checks



    • STANDARD ACCESSORIES ZMK 5050

  • 1 ZND 2052 thickness gauge 100-950um, in steps of 25um

  • 1 insertion thermometer, -10�C to +200�C

  • 1 hygrometer, 25% to 95% relative humidity

  • 1 electronic balance, 0 - 2000g

  • 1 magnifying glass, 6 x magnification with scale

  • 1 case

    • OPTION:


  • Insertion thermometer for measuring the temperature of thermoplastic marking material up to 400�C



    • STANDARD ACCESSORIES ZMK 5051

    As ZMK 5050, but with additional:



  • 1 ZMM 5000 Digital Thickness Gauge for Road markings for measuring the dry film thickness



    • OPTIONAL ACCESSORIES FOR ZMK 5051

  • Measuring bridge for the ZMM 5000: By means of this measuring bridge it is possible to measure over the whole width of the road marking to sketch a cross-section, as well as to take representative measurements on wide road markings

  • Printer for values measured with the ZMM 5000 (with statistics)

  • Digital display selectable - mm/inches



    • TECHNICAL SPECIFICATION

  • Warranty: 1 year

  • Standards: DIN EN 13197 and DIN EN 13212 (drafts), ZTV - M 84