mastrad  logohome






the Temperature Controlled Cabinet

The Temperature Controlled Cabinet

CRT 625

Catálogo pdf en Español

The CRT 625 Temperature Controlled Cabinet was designed to house NATs and NUs. It can also be used as a stand alone cabinet for specimen storage and conditioning

The CRT 625 Temperature Controlled Cabinet can be controlled to within 0.2°C over the range -10°C to +60°C using a P.I.D. digital temperature controller, the CAL3200. Forced air circulation over the heater and cooling fins and though the air duct in the rear wall ensures a uniform temperature throughout the cabinet. The cabinet also features an over temperature device which will switch off the fans, heating and cooling and illuminates a warning light if the temperature exceeds the set temperature. The front door is double-glazed and contains a heating element to ensure that the glass door remains clear whatever the temperature. Defrost water drains via a pipe on the back of the machine to a heated tray underneath the cabinet where the water evaporates.

CHARACTERISTICS

  • Full size glass door Temperature range -10°C to +60°C
  • Accurate P.I.D. temperature control
  • Heated glass for permanently clear viewing

  • SPECIFICATION

  • Temperature range -10°C to +60°C
  • Volume 625 ltr/22 cu ft
  • Weight 180 kg
  • Refrigeration Capacity 560W
  • Heating Capacity 1.1 kW
  • Connection 230V 50-60Hz
  • Connection Load 2.1kW
  • Interior size 1350 mm high x 735mm wide x 530mm deep
  • Exterior size 2000mm high x 815mm wide x 710mm deep